Home
/
HOBBYWING XeRun XR10 Pro G2 Brushless ESC/V10-4.5T G3 Motor Combo
HOBBYWING XeRun XR10 Pro G2 Brushless ESC/V10-4.5T G3 Motor Combo
icon-boxIn The Box (1) XR10 Pro (G2) (1) XERUN V10 G3 Competition Brushless Motor
Quantity
-
Detail
ESC Features
- Upgraded 32-bit M4 microprocessor with more powerful processing capability guarantees stable control and rapid response. (Industry's highest 32-bit microprocessor, increased processing speed by X4)
- Peak current up to 1200A. (this is not a typo)
- Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
- Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving; braking forces (of the motors).
- Expanded range of the max. brake force brings in the active brake ranges from 101% to 150%.
- Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency.
- 10 select-to-use profiles applicable to all 1/10th RC car racing.
- Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations.
- Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC.
- With the New WIFI express module (purchase separately), users are able to program parameters, upgrade firmware and check relevant data during the event using either the iPhone or Android devices.
- Switchable motor direction (CCW/CW) for various chassis.
- Multiple protections comes in standard
- low-voltage cutoff protection
- ESC and motor thermal protection
- Fail safe (throttle signal loss protection)
- Reverse polarity protection*
- Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time.
- Firmware upgrade via Hobbywing multifunction LCD program box or WiFi Express (item sold separately).
* The external standard cappack will still be damaged if battery reversal occurs. For full protection, recommend to use HOBBYWING SMT-MLCC capacitor banks (purchase separately)Motor Features
- Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when compared with the previous generation G2 motors.
- The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
- The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
- The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
- The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
- The use of high-performance stator core, heat(200℃)-resistant wire, heat(200℃)-resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
- It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC
Product Specifications
| Application | 1/10, 1/12 Scale Modified Class On-Road |
| Auto Cutoff | Yes |
| BEC | Yes |
| BEC Continous Current | 10A |
| BEC Type | Switch mode |
| BEC Voltage | 5.7V-7.4V |
| Brakes | Programmable |
| Drive Type | Forward/Brake/Reverse |
| Manufacturer # | 38020280 |
| Maximum Burst Current | 1200A |
| Maximum Continuous Current | 160A |
| Motor Design | Inrunner |
| Number of Poles | 2 |
| Overload Protection | Yes |
| Product Height | 1.27" (32 mm) |
| Product Length | 1.47" (37 mm) |
| Product Weight | ESC: 3.35oz (95g), Motor 5.7oz (163g) |
| Product Width | 1.22" (31 mm) |
| Reverse | Yes |
| Shaft Diameter | 0.124" (3 mm) |
| Shaft Length | 0.525" (13 mm) |
| Turns | 4.5 |
| Water-Resistant | Yes |
Customer Reviews
No comments
