JConcepts

Laser etched adjustments follow droop measurements plus or minus the bottom of the chassis height to provide the racer with a consistent reference. The plates on the droop gauge are marked on both sides depending on which height blocks the racer is using at that time. In example, the racer is dialing setup on a 1:8th buggy, they use the 36mm droop block under the car. The driver confirms the gauge plates are configured to the height for 36 blocks then measure the axle heights accordingly.

In addition, the handy droop gauge can also be used as a ride height gauge by simply sliding it under the car and checking the measurement as usual. The floating nature of the tool is great for quick and accurate checks of the setup. For additional methods, the floating gauge also has a thumb wheel to cinch or lock in a certain height. The ride height is measurable from 5 to 45mm for multiple vehicles and scales while the droop is from -20 to +9mm.

Match the JConcepts JCO5018 gauge with JCO5019 droop blocks for the best setting process in the game. The setup and tuning items are custom designed, labeled for authenticity and go together perfectly with the JConcepts JCO2103 setting board.